Seamingly Crafty

Sew, craft, cook, and more!

Having A Fun Frugal Halloween

So my intention was to get on here and share all of my money saving tips for Halloween!  Of course around here, I sometimes get so busy, I barely have time to breathe 😉

Well I decided that even tho I didn’t share my Halloween throughout October, I’d share what I did to save money this season, still have a great party, great decor, and amazing costumes on a dime!

The Decor

We are a Halloween loving family! We literally could transform our home into a haunted house inside and out every year.  Although we don’t go quite that far we do decorate a lot.  This year we made a trip to the dollar store and grabbed some cool murals to decorate the walls with.  These added so much more depth to our house and just some clear tape and a couple bucks and we had a spooky backdrop on several walls.  These did double duty when we had our party cause they gave our guests several options for photo ops. 🙂

This one we taped onto the brick right outside our front door. *TIP* Dollar store boxing tape stuck and stayed on the brick! Be sure to tape all around to keep the wind from getting under it and ripping it off the wall.

We hung up several different jointed life sized cutouts as well.

these make fun decorations, and fun for party pictures when they are posed 🙂

DON’T THROW AWAY THAT BROKEN BATTERED HALLOWEEN DECORATION!!

As with most years our decorations get roughed up outside from the wind.  This year one of our decorations was in desperate need of some TLC.  Most people would just toss them out when they get as battered as this guy was!  Since I don’t have a picture of him I can explain what we did.  He started as a 2′ hanging skeleton reaper.  He has plastic hands and foam head and originally was draped with a greenish soft papery type fabric and a cheese cloth over that.  The green papery fabric (I don’t know what else to call it) was torn up really bad and since it wasn’t really a fabric more like a glorified paper towel there was no way to doctor it up with matching material.  So what we did was used some scrap black fabric, and black creepy cloth from the dollar store to replace his existing fabric.  We kept the cheese cloth as that was real and the older it is the spookier it looks 🙂  We used hot glue to attach the fabric and creepy cloth and I used a wire hanger cut and bent into a new hanger for him which I attached securely.  We now had a new from old decoration.  If you don’t want to re-do your similar decoration that is too battered to use simply cut off the re-useable parts.  In this case I would have saved the head and hands along with the cheese cloth for a different project.  Any decoration for outdoor can be upcycled or recycled into something new or updated.  Don’t toss it out save $$ 😉

We used the cheese cloth we took off of the decoration to wrap around 2 large dollar store skeletons we painted green to make mummies. 🙂

Creepy cloth can be purchased at the dollar store.

A must! It comes in black and gray.

CUSTOMIZE YOUR CEMETERY WITH FUN IDEAS

We had to touch up some of our outdoor headstones too.  This just required paint which I had on hand and some outdoor clear coat spray which I also had on hand.  We made a couple of new headstones this year.  We are scary movie buffs 😉 so of course our cemetery reflects that.  On our headstones we have:

Fred E. Krueger  his headstone is dressed up with a hand painted Elm St. Street sign and of course his razor knives glove laying on the grass in front of the headstone I made it with an old winter glove spray painted brown and cut out of foam board the knives.

Micheal Myers  his headstone is dressed up with his iconic butchers knife purchased from the dollar store it came white glow in the dark I painted it with silver and blood red.

Jason Voorhees his headstone has his iconic hockey mask screwed to the top corner and his iconic machete screwed to the other side.

Jedidiah Sawyer I haven’t come up with a way to incorporate his iconic chainsaw but I did lay some severed body parts from the dollar store by his headstone.  I’d love to hear chainsaw ideas!!

I made a small coffin a couple years ago to cover our fog machine. I also had purchased after Halloween a couple years ago 3 small headstones with tubes that attach to the fog machine.  even tho they were made for the machine I have, the machine melted the attachments.  I have yet to come up with a way to fix it but still put the headstones out.

Here’s a link to my Instructable on making the coffin.

NOTE* Please follow your instructions that came with your fog machine.  My dimensions were cut to fit a small fog machine and I was sure to keep the end protruding out to keep the fog end cool.

SPEAKING OF CEMETERIES…

My daughter and I love these little headstones at the dollar store.

We grab one or two every year.  They make a nice mini cemetery for the mantel or coffee table etc.  We added some mini plastic skulls and mini skeletons from the dollar store.

While browsing Pinterest I came across this amazing life size spooky tree at 102 wicked things to do blog. I knew I didn’t have time to make it for this Halloween but as my daughter and I were cleaning up after making a Halloween wreath I thought Hmmm…. how about a mini spooky tree for our mini cemetery! YES!  So I kept the cardboard rolls from the dollar store ribbon we used on the wreath and followed most of the her instructions and created my mini spooky tree!  I LOVE IT!!  I added some purple spider LED lights also from the dollar store.

WHILE WE ARE ON TALKING ABOUT MY TREE FIND

Also on 102 wicked things to do blog I found a tutorial on how to make candles that look real but use cardboard tube and LED tealight candles from the dollar store.  We made 5 of them 3 for our candelabra and one for the bathroom candle holder.  She hit it on the head when saying you don’t want anyone catching on fire at your Halloween Party.  I actually had someone almost catch their hair on fire on my toilet… yes… toilet…. I had a tealight burning on the back of it thinking it would be safe. yes I thought it would be cause I don’t sit back and relax on the pot lol so these candles were an awesome SAFE way to spook up the commode. Find the tutorial HERE.

For the Halloween Party Costume contest I used her idea for the trophies!  They turned out great!

We also made 2 extras that weren’t featured in her tutorial.  Our categories were:

Best Costume

Most creative

scariest

funniest

best couple

most original

sexiest

penny pincher

party pooper

We purchased several skeletons from the dollar store. Some wood bases from the craft store some creative props a small piggy bank from dollar store a candle holder and we used a small skeleton we had already.  On Avery.com I chose small mailing label size labels I printed on 6 labels

The Austin’s Halloween Party
BEST COSTUME
2014

I made one for each.  On the Penny Pincher tag I added “start saving for next years costume” and put a penny in the bank. On the party pooper (the little skeleton) I added “next year wear a costume”

I made the background a goldish color on the labels. Printed them out on plain paper, cut them out and used mod podge to attache them to the bases of the trophies.  My daughter and I had so much fun making these!  And even more fun awarding them to the winners!

For voting I used 3×5 cards cut slits down one side to make 9 tabs, I decorated paper lunch bags and taped them to the wall around the voting table.  Taped up simple rules for voting (ie. only vote once for each category) and left the cards and several pens on the table.

——>Click Here to go to 102 wicked things to do<——

SPEAKING OF COSTUMES

This year I spent a lot of time on my daughters costume leaving very little time for my own.  So I decided to go simple and be a Witch.  All I did was make a simple tutu skirt out of tulle and ribbon.  I purchased a hat from the dollar store.  Used some scrap black fabric and the extra tulle and modified the hat to fit my liking. I wanted it to be crooked and longer.  I used floral wire glue and grocery bags to form the end.  Here is what I made for a buck and some free colorful leaves from my yard 🙂

THINK FRUGAL! PARTY TIME!

To keep the food cost down, we chose to do a taco bar.  We purchased taco meat from our local GFS store along with taco shells and a big bag of shredded lettuce, cheese sauce and tortilla chips.  I diced 5 medium tomatoes 2 large onions and served shredded cheese, sour cream, black olives etc.  I kept the meat and cheese sauce hot in crock pots laid out the spread and done.  I also made some witches hats zombie fingers and even put out some powdered donut holes covered with a couple black spiders (spider eggs) 🙂

I bought a few different flavors of 3 liter pop and made fruit punch and iced tea.

All our supplies were purchased at the dollar store.

That was some of our 2014 Halloween!

To wrap up this post I’ll leave you with a few pointers and must haves list for the dollar store.

MUST HAVES:

skeletons large and small

wall murals

party supplies

mini skulls

mini headstones

spiders

crows

creepy cloth

ribbon

LED candles and mini string lights

TIPS/POINTERS:

The dollar store stock sells out FAST!  I missed out on a couple of things I really wanted cause I waited to buy them.  Start shopping for Halloween at the dollar store at the end of August.  The items that don’t sell out too fast are skeletons crows and spiders these they seem to re stock or over stock.

SHOP FOR HALLOWEEN CANDY AT 5 BELOW if you have one near you.  I try to avoid the dollar store for this because although you think you are getting a deal in some cases you aren’t. By the time you purchase enough bags of for example charms suckers to equal the amount you get in a grocery store bought bag you are paying the same price if not more.  Certain candies are ok to purchase at the dollar store like dum dums and pixi stix.  You can always price and weight compare before you buy.

SHOP NOW! Halloween clearance is up to 75% off right now!  You can get ribbon, decorations, etc. at a fraction of the cost! Even the dollar store clearances their Halloween stock.

Think simple for party food!  Stick to one theme. example tacos.  This will keep your cost low.  You can also make it a pot luck ask your guests to bring a spooky dish.  And always do BYOB (bring your own booze)  We do offer what we have to all our guests but I always throw BYOB on the invites so the guests know they are welcome to what we have but any special drinks they should bring.

Think simple for your decor if you host your party out in the garage or a tent.  We put up black poly plastic on the walls and over our not so sightly garage junk hung up some caution tape all around. DONE!  Our guests were welcome inside or out.

If you have your party outside or plan on having any outdoor activities ALWAYS have a back up plan.  We had intended to have spooky stories and pass the story game by the fire pit.  Hot apple cider by the fire pit, and Halloween movies on the back of our house using a friends projector for fire and a movie after games and stories for the kids.  However, the wind was horrible so we couldn’t put up the party tent and couldn’t safely have a fire and since it was so cold and windy we couldn’t do the movies either.  So instead we hung apples on strings for no hands apple grabbing game.  I printed out free coloring pages from crayola.com  and my daughter offered several board games for indoor activities.  I would have done more but I didn’t have a back up plan. 😛 the weather changes like crazy here!

That about wraps it up for this Halloween Post!

Until next time… Keep it Frugal!

Advertisements
Leave a comment »

Repurpose an Old Furry Coat Vol. 1 Furry Leg Warmers

Furry Leg Warmers

Whew Halloween is over…. Wait that means its only 55 days till Christmas!

Before we start really thinking about that…

My daughter has this furry black hat with red devil horns on it.  This year she decided she wanted to be a devil girl for Halloween.  We love making our own costumes… they are much nicer than most store bought.  I remember a few of my old costumes from when I was a kid… There was the witch… it was by far my favorite!  The only thing I had store bought for that was the hat and the broom.  We had found a long black skirt turtle neck and this awesome black cape! it was satin with  silver stars on the trim all the way around the cape.  My mom had these really cool vintage owl necklaces which added that last touch I needed to make it perfect!  When I got older I had put together a punk rock costume out of 80’s clothes I found at a thrift shop.  Now I love making costumes. My fave is a couple years ago my husband and I were alice and the hatter from Tim Burton’s Alice in Wonderland.

Alice in the Um Dress and the Mad Hatter. I created my costume from scratch. I had to order the white material and I painstakingly added the black stripes and hearts to it. My husbands costume was a mix between homemade repurposed and altered thrift store finds. The top hat was made from scratch along with the hat pins. I even made the arsenal of thread from scratch.

Last year I was an Umbrella Corp. Chief Scientist in the Bio Organic Weapons Dept.

I found the skirt and shoes at a thrift store. My husband was working in a hospital and salvaged the coat and I made the name badge and used iron on transfer paper and printed out the umbrella symbol.

So anyway, My daughter needed some leg warmers to complete her costume.  I had this old vintage furry coat in the closet not being used and I thought I could use this for those leg warmers :).  Now you may be wondering what the Vol. 1 is all about.  Well I will be making more stuff with the remains of the coat. For now here’s how to make the warmers.

What you will need:

Furry Coat

Seam Ripper

Needle

Thick thread in the same color as the fur

Scissors

Measuring Tape

Jump rings

Ribbon

elastic

Step 1  turn the coat inside out and remove the lining from around the sleeve.  Next detach the sleeves using the seam ripper.

Next you want to remove the rest of the lining from the sleeve by cutting it off around the bottom of the sleeve leaving enough to tuck under and slip stitch in place.

Lay the sleeve flat with the bottom seam up and cut even across, as seen in photo below.

cut across where the scissors in the photo are.

Measure your leg or the leg you are making this for from the bottom of the knee down to the ankle. In my case it was 15 inches.  fold down the top of the sleeve to so it measures all the way around the measurement you came up with.

Next take the elastic and put it under the fold leaving the ends hang out.

Over stitch around the fold taking care not to go through too much of the sleeve.

when you get almost all the way around tie the elastic making it so it tightens a little. you dont want it to cut off circulation. Then finish stitching.

Next take your jump rings out and decide how many to use.  I chose to use 5, placing them 2″ apart.

Find the seam and lay the sleeve flat with the seam up.

Line the jump rings on either side of the seam. This will help you decide how many to use.

Sew the jump rings in place.  I looped around them twice and tied them really tight.

Last step..

Thread the ribbon through the rings.

and enjoy!

the kitty loves them too! 🙂

Until next time Keep it Crafty! 🙂

Leave a comment »

Ugly Chair Facelift

photo ©Stacey Austin

While shopping for antiques and collectables I came across this ugly chair.  It was good price and I instantly visualized how beautiful it could be 🙂

I purchased a few things for the facelift.  But still keeping my cost low.  I am going to walk you through step by step on how to give an old ugly chair a facelift!

Materials Needed:

The chair of course

flat head and Phillips screwdrivers

drill (may not be necessary)

drill bit (may not be necessary)

stapler & staples

rubber mallet

Krylon Fusion no sanding needed spray paint in your choice of color

1½-2 yards of fabric

cushion and batting (may not be necessary)

scissors

fabric paint for tufting buttons in matching color with material

hard bristle paint brush

tufting string and needle

chair sliders

Let’s get started.  The first thing you want to do is check the stability of the chair if there are any loose arms or legs you will want to tighten the screw in them.  My chair had a loose arm so this is where the drill came in because the screw was under a plug that was flat to the surface of the arm rest.  I drilled out the plug carefully and used the screw driver to tighten the screw.

Next you will want to pop off any plugs on the back of the chair that hide the screws holding the back cushion on.  Do this with the Flathead screwdriver.  If any of them break or will not come out you may need to drill them out.  Save any or all of the plugs that were not ruined, you will need them later.  Now remove all the screws holding on the back and bottom cushions.  Set these aside.  I am very clumsy at times so I put all my parts in a Ziploc baggie for safe keeping 🙂

Be sure your chair is clean and free of any debris.

This is a good time to pull off any pads from the bottom of the chair legs.

photo ©Stacey Austin

Now comes the fun part! 🙂  I normally do not think spray painting is fun BUT with this amazing new product, Krylon Fusion, it makes painting virtually any surface so much easier by eliminating the need to sand!!  I mean look at the chair, I would need a Dremmel as well as a sander to do this, making it cost more $$ and that is not what I like! 🙂  I like green and frugal projects!

So using this wonder product spray the chair.  Keep in mind you will get a better finish if you do multiple thin coats as apposed to one to two heavy coats.  Also spray those plugs you removed.

photo ©Stacey Austin

While your chair is drying lets get to the next step!

Using the Flathead screwdriver remove the staples from the back cushion and carefully pull the fabric away from the batting.  If your chair cushion has tufting buttons cut the strings before pulling back the material. Do the same with the bottom cushion but take care not to damage the cover (if one is on it) unless it is in bad shape then you will need replace it. This material is cheap but you may also use the material you purchased to cover the cushions.  Or none at all, no one is going to be looking under your chair. 😉

photo ©Stacey Austin

Once you have finished the daunting task of removing the staples inspect the batting and cushion.  If they are stained or smell or are falling apart you will want to replace it.  It is a good idea to bring the wood in with you so the employee at the fabric store can cut the foam to fit.  Unless you choose to cut the foam yourself. OK so lets move on.

lay the bottom cushion on the wrong side of your fabric taking care to keep the nap in the correct direction.  We wouldn’t want horizontal lines on the bottom and angled lines on the back cushion :S  Cut around the cushion leaving enough material to fold over the cushion.  Do the same for the back cushion then flip the material over the back of the back cushion and carefully cut out around the cushion this layer will be stapled to the back of the back cushion because it can be seen… we can’t leave this part exposed.

In this next step I chose to re use the tufting buttons that I took off of the chair.  I did not see a point in making another purchase if I could make due with what I had.  So, I used black fabric paint and a stiff brush and painted the buttons black.  Worked out pretty well!

photo ©Stacey Austin

photo ©Stacey Austin

Using your stapler starting with the bottom cushion fold up a corner and secure with a staple, follow the lines left from the staples you removed to ensure you don’t staple too far from or too close to the edge.  Next pull and fold over the opposite corner and staple.  Make sure the fabric is taut.  Repeat on the last two corners.

photo ©Stacey Austin

fold over the material close to the corners and secure with a staple making the corner look nice. I like to flip the cushion over to see how the pattern looks.. it may be necessary to pull tighter in some spots than others to make sure the pattern is nice and even.  I put in a few staples and check the pattern, pulling tighter where needed.  Once the material is secure trim the excess material away.  Lay the cover on and staple in place.

Follow the same process to cover the back cushion.  Before you put the cover on the back use your tufting string and needle to put the buttons on.

photo ©Stacey Austin

Start in one of the upper holes on the back of the cushion and secure your first button.  Do this by pushing the needle through the hole then through the back of the button then back into the cushion and out of the back.  Remove the needle  and pull the string tight and secure with a staple, pull to the side slightly and secure again two more times or so.  Do not staple the string straight, you want to zig zag the string and staple this will keep it from pulling out.

Photo ©Stacey Austin

Photo ©Stacey Austin

 

Now cut excess material cover with the piece you cut out and staple in place then trim excess.

Photo ©Stacey Austin

If you have not taken a break, now is a good time.  Do some stretches or have a cup of coffee! 🙂  Laundry.. YUK! lol anyway you should step away if you find you are having difficulty throughout the project.  I find that if I do this when I come back to it, my head is refreshed and I am ready to get it finished!

Little side story… I did not have my proper stapler at first so I thought maybe using my hubby’s hammer tacker (stapler) would work out just fine… WRONG!  Yeah.. this girl… hammer tackered her thumb!! OUCH!! poor thing is all bruised and swollen and unable to hit the space bar as we speak… and it is awkward not using it for the space bar. lol  So please do not attempt to supplement the proper stapler for this project.  SAVE A THUMB! 😀

Alright we are ready to get the cushions back on! wohoo! So if you listened to me your screws will be all secure in a baggy. grab them out and re screw them into the cushions.. Don’t over tighten them.  You want them tight then a quarter turn.

If you saved the plugs using a rubber mallet pound them back in.

Last step before enjoying your new old chair.  Flip the chair over onto a table if it has not been at least 4 hours since you sprayed the chair put it on top of a towel or two to ensure you do not chip the paint on the arms.  Using your rubber mallet pound in the super sliders onto the bottom of the legs.

Photo ©Stacey Austin

DONE!

photo ©Stacey Austin

NOW YOU CAN ENJOY!

If this was your first recovering of a chair pat yourself on the back! My first time sucked 😉  and it looked horrid!  This was my… well… heck I don’t remember how many recovers I did on chairs and stools etc. 🙂

Till next time, Keep it green, keep it frugal and keep it CRAFTY!

2 Comments »

Getting started on a storefront

Again I feel as if I have neglected my blog by being MIA.  I do have good news. On my about me page I mentioned how I was working with my mother to open a resale shop.  After much headache and disappointment we finally got it started!

I’ve been working hard with my Mom to prepare the shop for our Grand Opening on Oct. 1.

The Thrifty Trunk

We purchased the shop as is and have been moving arranging and sorting everything.

A Halloween Display my Daughter and I put together.

Unfortunately our large windows don’t have a large enough ledge for a nice window display (that is one thing we are working on fixing) we had to put this facing into the shop.

On the other side of the foyer we were able to put shelves up on the ledge by the window.

which made a great place to put some beautiful teapots.

I have much more I am arranging.

Next time I’ll share the whole layout.

Until next time!

Leave a comment »

DIY Address Book & Freebie

I believe I made a promise to upload a freebie! 🙂

I finally got it done and all worked out!

This is a Tutorial and freebie in one.  I had been shopping for a new address book for some time now.  I didn’t like what I found for the price that was on it!  So my imagination gears were spinning and I came up with a way to make my own address book.  Not only is it cheaper for what I want but it is also customizable to my liking and can be made customizable to your liking as well!  I was annoyed by my old address book because of a few reasons.  1. There wasn’t a section for websites.  I started forgetting my passwords and such cause of so many so for my address book there is a section just for websites!  Of course you can leave this section out or make a separate book for that. 🙂 2. I have like a bazzillion A’s and No Z’s in my address book, there was just not enough room for my A’s and A’s and B’s were together so my B’s would get lost in the A’s.  Now I can print as many A’s as I need!  3. When people move I can just simply print up a new page No more white out! 🙂 Or strike outs. 🙂  4. I now have a section for just birthdays! no more being a day late! 😉

So lets get started shall we?

First the FREEBIE I created!! 😀  Let’s get the files we need.  I have below links to download each of files you will need including a file with instructions on how to change colors and print the documents.  You don’t have to be a pro at word and I am here to answer any questions.

Address Book A to Z

Address Book Websites

Address Book Birthdays

Address Book document instructions

*note these documents were created from scratch by me!  Please do not claim them as your own.  If you use them in your own blog please provide proper credit and a link to my blog.  Please read my full disclaimer and copyright page. 🙂

Now that you have the documents downloaded lets get them printed up.

I wanted to make this as simple as possible.  If you are ok with the color they are then all you have to do is follow the instructions on changing the Letter and the Months.

Get your pages all printed out.

Here is a list of the materials you will need to do this project.

  1. all the printed pages from my documents
  2. 1″ binder
  3. Material of your choice
  4. A paper cutter with ruler
  5. cardstock
  6. 3 hole punch
  7. a page divider (this is just for measurements)
  8. clear tape
  9. ½” letter stickers
  10. hot glue gun and glue sticks
  11. box cutter
  12. hole punch reinforcement stickers

Sorry for the jumbled mess lol 🙂

First we will need to prepare the paper.

So on a nice large and clean work area get your cutter and print outs.  As seen in the photo below you are going to measure the left side of your page to 7 inches and cut.

Next turn the page so you are cutting on the opposite side line up to 6 inches and cut.  As seen below.

Do this with all of the printed pages.

Next we are going to punch the holes on the right side of the pages.

Your pages should look like this.

This is a great time to take a break.  Yes that took some time.  Unless you have one of the awesome cutters the schools have and where able to cut multiple pages at a time!  Sweet! Lucky you 😉

Next step we are going to start making the dividers.

take one of the dividers and line it up on a piece of card stock as seen in the photo below.  Use a pencil and mark a line down the card stock. This section should be ½” wide.

Now affix the uppercase letter A at the very top right of the card stock.  Using scissors make a horizontal cut under the A to the line you marked in the last step.  Using your cutter or scissors cut off the strip you marked.  If you use the cutter make note of the measurement for the cut this way you can just use that for the rest of the tabs instead of marking each piece.  Your alignment for it should be 8″ so you are cutting off a ½” strip.

Line your Letter A tab card stock up onto another piece of card stock and affix the Capitol letter B just below the A.  Cut horizontally on the top and bottom of the letter B ½” in close to the letter.

Cut off the strips as you did with the Letter A tab.

Depending on the size of your letters you should have Q at the very bottom when you get to that letter.  If not that is fine. Just continue the last steps until you get to the bottom.  Your next letter will be at the top of the next card stock page in my case it was the letter R. Continue on to Z.

Next using your lower case letters turned sideways stick the word “web” just under Z tab you just made.  Cut horizontally as you did for the letters and cut off the strips.  Do the same for birthdays.  I made my tab say “b~days”

Next step can be tricky.  We are going to cut the dividers to fit.  Turn the dividers so the tab is on the left side of the cutter and line up to the 6″ mark.  DO NOT measure the tab!  See the photo below for proper measurement.

Cut each divider then punch in the holes on the opposite side of the tabs.

Now we are going to move on to the binder.  So put all of your paper aside clean up your space so you have a nice clean area to work in again.

Take a break if needed and have a glass of wine or stretch 🙂

Open your binder and using your letter A piece of paper put it in the rings.  Use a pencil and mark the edge of the paper on the top and bottom on the right side onto the inside of the binder.  Measure from that to the right another ½” or so make a straight line and carefully cut off the end using your box cutters.  (you want to leave enough of the binder to cover the tabs when closed)

Close the binder and using the cut side as a guide cut the other side off of the binder.

Open your binder and lay it on the wrong side of your fabric.  Cut the fabric leaving about 2″ all the way around the binder.

fold in the 4 corners hot gluing them down trim the point off.

Run a bead of hot glue down the side from corner to corner and fold the edge in half. NOT over the binder yet!

this will make a nice clean edge.

Now run another bead of hot glue this time fold over the binder.

Do the same for all 4 sides making sure you pull the material taut so there are no wrinkles and it is nice and tight to the binder.

You can also spray glue the material to the binder if you like.

Make sure the edges are glued down good adding more hot glue if necessary.

Next step we are going to start filling our binder!

Before putting pages in put the reinforcement stickers on the front and back of your pages. These will help your pages last a long time. 🙂  You can put them on one side only if you like. Or not at all!  Remember the best part of this project is you make it your own!

I liked having the pockets inside so I left them. I sometimes get letters from people and I rip off their address and stick it in my address book so I can write it in later. lol I also sometimes like to keep important business cards in my address book and they usually fall out so I kept the pockets for this purpose! 😀

As you can see I only put my reinforcements on one side but I am going back to add them to the other side too because I have plenty left over!

Save any you have left for future use if you ever need to add pages to your address book!  They also come in handy when doing your own manicures.. but that is a totally different post! 😉

Here is my finished book!

As you can see I added an embroidered patch to the front of my book that says Addresses. You don’t have to do this or you can! It’s all customizable to you!

The final step is to put write in your addresses and enjoy your custom made address book!

I hope you enjoyed this tutorial and the freebie!

Till next time.. Keep it Crafty! 😉

Leave a comment »

Heart Shaped Box Re-purpose part 2

For those of you that followed my first post on re-purposing heart shaped boxes here is the second part.

Tonight my daughter helped me with this one cause it is for her.

I found a really cute how to on the kodak website for a candy box photo frame. You can find it here.

Here is how we made ours.

I had my daughter pick out a cute picture of her and her boyfriend then used the box to trace the heart.

We carefully cut the heart out.

We used silver acrylic paint on the back side of the box and inside around the picture.

We cut out a stand on the back then hot glued the hearts together and glued the picture inside.

Sooo adorable!

I still have a couple more boxes I am going to re-purpose so be on the look out for it!

1 Comment »

Heart Shaped Box Re-purpose ♻

Valentine’s Day is over and you are left with a few reminders like the cards and flowers.  You also have that heart shaped box that your yummy chocolates came in.  Last year I received this very pretty box from my husband. It was a velvety material with a white and gold rope around the edges.  The sides of the box where also velvet.  It was so pretty I didn’t want to just toss it in the garbage but I also didn’t want to have it sit around in my closet with other clutter I really need to start weeding through.  So I thought… What a cute pillow this would make!!

I started to carefully pull the material away from the cardboard. Once I had it all pulled apart I noticed the material and rope was all just glued together. So my second step was to carefully sew around the entire seam making sure I caught the rope too.

Although the heart was pretty as it was, I still wanted to add a little something to it so I looped it up and put it on my machine and embroidered an “A” in the middle with white thread.

Next I used the foam that was placed between the fabric and cardboard as a guide to cut out a heart from some scrap satin I had.

I sewed it together stuffed it and this was the ending result…

 

This year my box of chocolates did not have fabric on them.  I did see some really cute ones in the store tho!

I will be posting other Reusable ideas for heart shaped boxes!

Until next time.. Stay crafty and be green!!

7 Comments »

CBS Chicago

CBS 2: News, Weather, Sports On All Platforms

The Sewing Garden

How to Sew and Alter Garments and Home Decor

Buzy Day

The adventure of NikkiM

ice cream magazine

................... for lovers of ice cream. Your free on line magazine for sweet frozen treats. Recipes, inspiration, artisanal ideas for your delectation.

paintedposies

creating, growing, planning, living and capturing a well-crafted life

Life With my Kids

My experiences as a wife and mother, homeschooling, and caring for a family. Health, nutrition, and natural living.

Writings of a Mrs

Follow my journey to writing, Blogging and publishing my musings..

One Tree Photography

Sew, craft, cook, and more!

Pepperbox Couture

Reduce, reuse, recycle - the sustainable design style

The Pioneer Woman

Plowing through Life in the Country...One Calf Nut at a Time

Sew Vac Outlet (Humble Sewing Center) Blog

An informative, education blog for anyone interested in Sewing, Embroidery, Quilting, Serging and more...

Jo and Sue

Sew, craft, cook, and more!

Lolly Jane

Sew, craft, cook, and more!

%d bloggers like this: