Does it look complicated? If you said yes… I have some good news.. it isn’t! It is also surprisingly cheap to make!
In my previous post A knock off Rockabilly dress I shared how I made a similar looking Hell Bunny dress. To finish the look I needed a petticoat. Petticoats can be quite pricey depending on the length and fullness you are looking for. I have come up with an inexpensive simple way to create this petticoat.
So here is what you will need:
- A roll of tulle 15 yards 4″ wide
- 2 yards of lining material
- 5/8 inch ribbon in matching color approx. 3 spools 18′ come on the Offray spools
Yep that’s it! 4 things!
The roll of tulle was $2.99 Ribbon was 1.97 a roll and the elastic was 28¢ a yard. The lining was $1.99 a yard.
pretty cheap 🙂
The lining can be anything from nylon to a cotton blend. Whatever is cheapest for you and won’t irritate the skin. My lining is a cotton blend with some nylon in it. I just grabbed the black bolt in the lining section at my fabric store. There are usually 3 color choices.. white, black, and cream. If you go with Nylon you can find more colors but this is not necessary because only the bottom of the petticoat will be visible.
I found the roll of tulle at Joanns in the bridal section. there are several color choices. If you want to make a really bold statement Hobby Lobby carries a variety of tulle rolls ranging from solids to polka dotted to zebra print in many colors. Be frugal and go to their websites to print out or save to your smart phone their coupon! It will save you $$!
The satin ribbon can also be found at any fabric or craft stores in a wide variety of colors and prints! For my petticoat we wanted something simple but gorgeous because we didn’t want to take the attention away from the dress. The dress as seen in my previous post has many eye catching statements so we didn’t want to take from those. however I think a dress with less eye candy would look amazing with a black petticoat and hot pink ribbon! 😉 Or even a purple polka dotted petticoat with a bright bold yellow ribbon! (say that 5x’s fast) lol
Don’t be afraid to bring your dress in to the store with you to match up the perfect tulle and ribbon! Trust me the ladies & gentlemen in the fabric department LOVE to see what you are creating and share their ideas and get input on yours! Most of them share your love for sewing and crafting! In the time I worked as a supervisor in a fabric store I have seen everything from pillows, shoes, to motorcycle gas tanks come in! YES a man brought in a gas tank from his custom motorcycle to get some great vinyl to match!!
Let’s get started!
You will need to cut from the tulle one 8 yard piece and one 4 yard piece.
From your lining you will need to cut a 6 inch by 2 yard piece. You will have plenty left for your next petticoat 😉
Starting with the 8 yard piece fold it in half, set your machine to 1.5 mm stitch and sew the ends together to make a giant tulle circle. fold down the seam to one side and sew over it close to the edge. You don’t have to do this it just makes it look prettier when the seam isn’t sticking out.
Follow that step for your 4 and 2 yard pieces.
Grab your 8 yard piece and a spool of ribbon, fold the ribbon over the edge of the tulle and sew into place with your length set around 3.5 mm. This gives your petticoat a really polished and finished look! This is a tedious step and the hardest step. But don’t stress over it. once you are done go back and check the ribbon and mark each spot that the thread missed and go back and sew it. No big deal! 🙂 even when pinned I miss a spot or two! When you reach the end of the ribbon grab another spool and to start it fold the end under a bit and do the same when you come to the where you started.
With your machine set to 5.0 mm stitch around the 8 yard piece on the side without the ribbon. gather and attach it with pins to the 4 yard piece and baste. You will have to work the gather to get a good fit. Open it up and using the ribbon lay it flat over the seam between the 2 pieces stitch the bottom of the ribbon down then the top taking care to fold the ends to make for a polished finish also because ribbon frays! and we don’t want our pretty petticoat to look drab with frayed ribbon sticking out. 🙂
Gather the top of the 4 yard layer just like you did for the 8 yard piece. Attach it to the lining piece by sewing it with a 2.5mm stitch. Fold the seam up towards the lining and top stitch around sewing the seam down.
Over lock the edge of the lining piece or serge it. fold down ½ inch or so just enough to fit your elastic sew down leaving an opening at the seam to insert the elastic.
measure your waist and cut the elastic to fit. Feed the elastic through the top of the petticoat. Sew the ends together with 1/2 inch seam allowance or more depending on how snug you want it. Try it on, if the fit is good sew the opening shut. If not adjust as needed.
Cut any hanging threads, and if your cat is like mine and MUST lay on everything you are working on use a lint roller to get the fuzz and hair off of it. The lint roller also works great for little pieces of thread..I find that thread is highly attracted to tulle. 🙂
You are done! Put it on and admire the beauty! 🙂
Some additional options..
If you would like your petticoat to be even fuller you can simply repeat the steps for the 8 and 4 yard pieces omitting the ribbon between the pieces but making sure you still fold over ribbon on the bottom of the 8 yard piece and you will want to fold the seam up and sew it down between the pieces where you leave off the ribbon. This piece you make will be gathered and attached to the lining piece with the first piece you made but underneath it. So you will have 2 layers of the 8 and 4 yard piece but the top layer will be the one with the ribbon between the 8 and 4 yard piece.
If you would like your petticoat to be longer you can do this by making the lining piece wider than 6″ or adding another layer to the bottom making this layer 9-10 yards long. You can also achieve more length by making 2 4 yard pieces and sewing them together before attaching one end to the 8 yard piece.
You can also leave out the ribbon all together 🙂
Until next time! Happy Sewing!!